View NTE851_294949.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NTE851 Integrated Circuit VHF/UHF Prescaler
Description: The NTE851 is an integrated circuit prescaler in a 14-Lead DIP type package intended for use in TV frequency synthesis tuning systems over an input frequency range of 90 to 1000MHz. It performs division by 256 in he UHF mode and division by 64 in the VHF mode. The mode of operation can be selected by means of the bandswitch and the separate UHF and VHF input pins provided. The output is a complementary emitter-coupled stage with controlled slew rate for harmonic suppression. All input pins should be AC coupled to the appropriate input signal source. Because of high sensitivity, unbuffered coupling from the local oscillator is possible in most cases. In the UHF mode, which is activated by applying a high level to the bandswitch input pin, all eight divider stages are operative, resulting in division by 256. In the VHF mode, activated by a low level at the VHF input pin, two divider stages are bypassed, resulting in division by 64. As a result, approximately the same range of output frequencies are generated fo both the UHF and VHF TV bands. An internal amplifier/multiplexer provides this control while isolating both inputs and amplifying the VHF signal. In addition, hrmonic output is reduced above 40MHz by limiting output signal rise and fall times and maintaining a balanced load. Features: D Broadband Operation: 90 to 1000MHz D High Sensitivity D Standard 5V Power Supply D Dual Mode Operation: VHF/UHF D Complementary ECL Outputs D Independent VHF & UHF Input Pins Absolute Maximum Ratings: DC Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5V DC bandswitch Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V RMS Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mV Device Dissipation (TA +70C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600mW Derate Linearly Above 70C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.5mW/C Operating Ambient Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to +70C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55 to +150C Lead Temperature (During Soldering, 1/16" from case, 10sec max) . . . . . . . . . . . . . . . . . . . . +265C
Electrical Characteristics: (TA = +25C, V+ = 5V, V- = 0 unless otherwise specified)
Parameter Supply Current UHF Bandswitch Input Voltage VHF Bandswitch Input Voltage UHF Bandswitch Input Current VHF Bandswitch Input Current UHF Sensitivity Level Input Voltage VHF Sensitivity Level Input Voltage Output Voltage Output Voltage Rise and Fall Time Symbol I+ VBH VBL IBH IBL VIN(U) VIN(V) VO tr, tf Pin Connection Diagram V(+) 1 1 V(+) 2 2 Bandswitch Input 3 Output 4 Output 5 N.C. 6 V(-) 1 7 14 VHF Input 13 VHF Input 12 N.C. 11 N.C. 10 UHF Output 9 8 UHF Output V(-) 2 Test Conditions Pin1 and Pin2 High Level Low Level VBH = 20V VBL = 0 fIN = 450 to 950MHz, fOUT = fIN/256 fIN = 90 to 275MHz, fOUT = fIN/64 Pin4 or Pin5 0.65 - 1.0 70 - - Min 30 2.4 - - - - Typ 60 - - - - - Max 90 - 0.8 0.5 -1 80 Unit mA V V mA mA mVrms mVrms VP-P ns
14
8
1
7
.785 (19.95) Max .200 (5.08) Max
.300 (7.62)
.100 (2.45) .600 (15.24)
.099 (2.5) Min

▲Up To Search▲

Price & Availability of NTE851

	To Download NTE851 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .